Desofin fabricant de Chine

Le raffineur en laiton de fonte de grain de lingot a affiné réduit mouler le Temp

Desofin, the trademark chemical powder, would be used to the following alloys: Alloy Class and General Parameters Dosage Expected Results Special Instructions Grain Refinement Deoxy-dation Reduced Casting Temp. Yellow Brass (Over 17% Zn. Sn less than 6%. Under 2% total Al, Mn. Ni, Fe, Si. Pb less ...

vidéo

Instigateur en laiton de Desofin de lingot pour le sodium d'industrie de métallurgie libre

Desofin grain refiner is the chemical powder for metallurgy industry invented by Richard H. Haupt. Mr. Haupt, born in America,engages in brass permanent molding industry in all his life till now. He discovered several metallurgical chemical powders. Among them, I75L mold-release agent was invented ...

vidéo

Instigateur en laiton Desofin de fluidité pour le bâti de gravité du robinet

The introduction of Desofin: Form of product 50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule packing while being used. Consumption 150 grams capsule for each 1metric ton of melted brass or melted alloy Alloy requirements ◆Suitable for all copper alloy, ...

Raffineur de grain de bâti de basse pression de Desofin For De Oxidation de robinet en laiton

Desofin Additive Pat Applied for B2 Alloy. What we can found the smooth surface. The Better Ductility. The Potential Savings: 1. Savings over the cost of purchasing fine grained ingot. 2. Energy savings resulting from lower casting temperature. 3. Materials savings. It's not necessary to refine ...

B2 alliage Desofin 50g par additif en laiton de bâti de basse pression de tube

Form of product50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule packing while being used.Consumption150 grams capsule for each 1metric ton of melted brass or melted alloyAlloy requirements◆ Suitable for all copper alloy, including pure copper (99.85%)◆ Work ...

50g de moulage par raffineur en bronze de grain de capsule avec le tube en aluminium

The expected benefits: Lower the casting Temperatures are possible depending on the size of the part to be cast and the type of mold to be used. Generally between 940 and 980 degrees C for beryllium copper molds. Cracking Tendencies of the parts to be cast are greatly reduced and most often, cracks ...

vidéo

Raffineur de fonte en laiton de grain de solvant de Desofin point de fusion de 950 degrés

Desofin in slim aluminum tube of 50g Desofin pat. applied for brass ingot melting. Method of using when melting: Any adjustments to the aluminum or zinc content of the melt should be made prior to adding Desofin The surface of the melt should be reasonably free of slag Desofin should be added to the ...

50g par bâti de gravité de robinet en laiton de Desofin de raffineur de grain de capsule

Desofin with 50g powder in capsule Method of using : Observing the brass bath surface, especially adding new ingot or turn-overring Adding the proper quantity (generally 1-2 tube) Desofin when finding oxidation or worse fluidity Form of product 50g/capsule, can be put into the cooper melt together ...

raffineur en bronze de grain du manganèse 50g point de fusion de 950 degrés

Method of using : Observing the brass bath surface, especially adding new ingot or turn-overring Adding the proper quantity (generally 1-2 tube) Desofin when finding oxidation or worse fluidity Form of product 50g/capsule, can be put into the cooper melt together with the sealing aluminum capsule ...

1 2 Suivant